Basic Hard Drive Characteristics
Externally, hard drives have a power connector, a data connector, and jumpers. We discuss jumpers later in this chapter. The power connector is connected to one of the drive connectors from the power supply, and the data connector is connected to the appropriate drive connector on the motherboard. Internally, hard drives have spinning magnetic platters and heads. Heads are small devices that store and pick up magnetic information from the platters; they have similarities to heads on cassette tape machines. Storage areas on the platters are divided into portions called cylinders, sectors, and clusters. Information about these parameters appears in the hard drive documentation and often on the paper label on the housing. When you go to the BIOS setup page that shows hard drive information, an example of which is shown in Figure 6.2, you might see some or all of this information and possibly more. Under the “type” category, there are usually three or more settings: User, None, and Auto (other settings might not apply to stationary hard drives). The None setting disables the drive. User allows the user to input the settings manually. If you choose User, the settings must match those of the drive exactly. Auto has the computer detect the drive information; on the vast majority of newer computers, Auto is the best setting.
Figure 6.2: Hard drive information in a BIOS setup program.
| Note | This book is concerned only about what you need to know about hard drives in order to fix PCs. However, it will be very helpful to see the clear and simple explanation of how hard drives work at howstuffworks.com/hard-disk.htm, or search howstuffworks.com for hard drives. |
بواسطة : Book-PC Repair and Maintenance: A Practical Guide
